Compact CO2 Laser Marker LP-GS SERIES - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Compact CO2 Laser Marker LP-GS SERIES


Revolutionary compact size

LP-GS
CE Marking FDA

CE , FDA Approved
CE : Low Voltage Directive, EMC Directive

Features

NEW March 2015 New ultra-small character type has been added in the LP-GS series.[LP-GS052]

Character size 0.2mm or less*0.0079 in or less
The LP-GS052 has been added to the lineup of the compact CO2 laser marker LP-GS series, which can mark ultra-small characters. The CO2 laser marker is now able to mark characters of 0.2 mm 0.0079 in or less in height and width. It enables high-quality marking on more compact and thinner electronic components.
*There are cases that a target object cannot be marked due to its material or marking condition.


The LP-GS052 can mark characters sharply that are so ultra-small that they cannot be seen with the eye alone. 
Traceability can be realized even for small components with limited marking space.

 

Marking examples

 

Narrow pitch connector
Narrow pitch connector
 
Discrete device
Discrete device
 
  LP-GS Series common features 

Revolutionary size

Minimized head size contributes to floor space cost reduction.

Downsized unit
The LP-GS series Laser Marker heads have considerably decreased in size. The controller is also miniaturized so this downsized unit contributes to reduce floor space cost.
Heads can be installed in any direction (Vertical, Horizontal), allowing users design their equipment more flexible.

Downsized unit

Marking on a wide area
The LP-GS series head ensures both miniature size with light weight. Moving the head to the marking position ensures high-quality marking over a wide area. Due to the smaller head size, less space for installation is required, even when marking on an M- or L-sized large circuit board. The cable between head and controller is flex-resistant.

Marking on a wide area

Please note that exess force should not be applied when moving the head.

Production improvements

Drastic improvements in marking quality and man-hours for setup change

Marking on circuit boards with various thickness
Previously the head height had to be adjusted each time the circuit board thickness was changed. LP-GS series have integrated Z-axis control mechanism which allow adjustment of the work distance based on circuit board thickness.The mechanism both eliminates man-hours to change setup and maintains marking quality stability.

[Example of height control via Z-axis control]

Example of height control via Z-axis control
With Z-axis adjustment
With Z-axis adjustment
 
Without adjustment
Without adjustment
 

This Z-axis control mechanism helps to improve the production efficiency when marking on not only substrates but also workpieces of various sizes.

IC

IC
 

Connector

Connector
 

Connector

Connector
 

Camera correction without PLC
A camera can be used for adjusting the tilt of the work piece to maintance the marking quality.
Connect the LP-GS series and the camera directly to transfer the correction data from camera to the Laser Marker. In addition, man-hours for PLC programming can be reduced.

Camera correction without PLC

Smart operation

Operability that focuses on "easy to use for anyone"

NEW New dedicated software: Laser Marker NAVI smart
Includes the new dedicated PC configuration software Laser Marker NAVI smart. It is compatible with Windows® 8.
When used with a tablet PC*1, touch panel operation becomes possible. 
*1 Use a commercially available tablet PC.

NEWSetting assist functions
It requires a certain amount of experience to set the optimum conditions for a wide variety of workpieces. So, an assist function has been added to make settings of optimum conditions simply.
Even a beginner can output conditions, greatly shortening the lead time to start production.

Setting assist functions

NEW Individual screens for different purposes
The "Laser Marker NAVI smart" display can be switched according to user purpose, such as for the "operator" or "supervisor". The precise screen indication enhances operability when confi guring or checking settings.

[For supervisor] Configuration screen

[For supervisor] Configuration screen
The data to be marked can be edited not only previewing it. Even complicated settings can be finely adjusted while previewing the data, which improves the work efficiency.

[For operator] Configuration screen

[For operator] Configuration screen
Equipped with a "watch function" that displays only the necessary parameters while production is in progress. Operator error can be prevented because only the parameters to be changed by the operator are selected and displayed.

[For maintenance manager] Maintenance ins

[For maintenance manager] Maintenance inspection screen
The Laser Marker operation history, error history and other parameters required for stable operation can be confi rmed. This information is useful for making maintenance plans and preparation.

Many convenient functions

 

"External device link function" - controllable without PLC

Previously, a PLC was required in order to coordinate the Laser Marker with image processing devices and readers. The LP-GS series is capable of direct data processing with certain devices even without a PLC, thanks to the external device link function.

 

 

[Link with an image processing device]

<Position adjustment marking>
The Laser Marker is equipped with a new function that provides direct control of an image processing device (IPD). Now the Laser Marker itself can trigger the IPD to send the workpiece position (coordinate data). As there is no need for a PLC and programming, the amount of man-hours is reduced.

Link with an image processing device

<Read and collate marking data>
A new function has been added which enables to control a sequence of operations from marking to reading the code. The reader (IPD) reads codes marked by the Laser Marker and collates them with the original data to check whether the code is correctly marked.
This helps to prevent mixup of incorrectly marked products.
The reader (image processing device) reads code marked by the Laser Marker and the Laser Marker collate it with the original data to check whether the code is correctly marked, in order to prevent mixup of incorrectly marked products.

Read and collate marking data

[Link with a code reader]
The laser marker can be controlled by reading code.

Connect the laser marker and code reader directly and read data, such as production instruction, etc. Based on this information, the Laser marker can execute various operations configured beforehand, e.g. change the marking data. Laser Marker controled by code data prevents input error by operator.

Link with a code reader
Title 2D CAD DATA 3D CAD DATA

LP-GS051(-□) [Head]

LP-GS052(-□) [Head]

LP-GS Series [Controller]

Applications

IC
IC
Connector
Connector
Connector
Connector
Connector
Connector
Circuit board
Circuit board
Resin molded products
Resin molded products
Electronic parts
Electronic parts
Outer boxes
Outer boxes
Aluminum wrapping materials
Aluminum wrapping materials
Laser label( marking + half-cut)
Laser label( marking + half-cut)
Film (processing)
Film (processing)
Optical fiber (processing)
Optical fiber (processing)
Camera module
Camera module
Small push switch
Small push switch
Narrow pitch connector
Narrow pitch connector
Discrete device
Discrete device
Title 2D CAD DATA 3D CAD DATA

LP-GS051(-□) [Head]

LP-GS052(-□) [Head]

LP-GS Series [Controller]



Title FİLE

LP-GS

Laser Marker Selection Guide


Title FİLE

Title FİLE