Sensor Block for Simple Wiring SL-BMW/BW - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Sensor Block for Simple Wiring SL-BMW/BW


Quick connection of 16 sensors

Sensor Block for Simple Wiring SL-BMW/BW

Features

Set of 16 inputs directly hooked up to PLC

Up to 16 sensors can be connected on one main block followed by three extension blocks (or one snapconnector extension block).

Set of 16 inputs directly hooked up to PLC

Simple sensor connections

Simple sensor connections

- Amplifier-separated photoelectric sensor
SU-7J

Simple sensor connections

- Input terminal unit
SL-TJ1 (Note)
Various input devices can be connected.

Note: PNP output sensors cannot be connected to SL-TJ1 or SL-BXJ.
Simple sensor connections
The wires of the sensor cable are inserted into the snap-connector holes and then simply pressed with pliers. There is no need to strip the wire insulation or to use any special tools.

Wiring to connect four sensors is reduced to half [SL-BW]

Individual outputs of up to four sensors and the ORed output of the elfdiagnosis outputs can be output.
(Output of three sensors if the selfdiagnosis output is used.)

Wiring to connect four sensors is reduced to half [SL-BW]

Title 2D CAD DATA 3D CAD DATA

SL-BMW

SL-BX

SL-BXJ

SL-CJ1

SL-TJ1

SU-7J

Order guide

Designation Appearance Model No. Description
Sensor block Plug-in unit
sensor main
block
SL-BMW One sensor main block allows four plug-in units to be connected, and if three extension blocks are used, total 16 plug-in units can be connected.
A commercial MIL connector cable links it to a PLC input module.
(The ORed output of the self-diagnosis outputs of the connected sensors can be output as Channel 0. However, in this case, a plug-in unit cannot be connected at Channel 0.)
Plug-in unit
extension
block
SL-BX Four plug-in units can be connected to one extension block.
Snap-connector
extension block
(Note)
SL-BXJ Eight input devices can be connected to one extension block.
The connections are simple using snap-female connectors.
Plug-in unit
4-channel
sensor block

The photo above shows a plug-in unit attached.
SL-BW Four plug-in units can be connected to one extension block.
The attached cable links it to a PLC input module.
(The ORed output of the self-diagnosis outputs of the connected sensors can be output as Channel 0. However, in this case, a plug-in unit cannot be connected at Channel 0.)
Plug-in unit Amplifier-separated
photoelectric
sensor
SU-7J Its thickness is merely 10 mm 0.394 in. The sensitivity is automatically set with ease.
12 kinds of sensor heads are suitable with it.
[Refer to SU-7 / SH series for details.]
Input
terminal unit
(Note)
SL-TJ1 It allows connection of 1 No. of various kinds of input devices, such as, a photoelectric sensor, an inductive proximity sensor or a limit switch.
Snap-female connector SL-CJ1
(White)
For 0.08 to 0.2 mm2
(Conductor cross-section area)
Wire dia.:
ø0.7 to ø1.2 mm
ø0.028 to ø0.047 in
It is used to connect an input device to the snapconnector extension block.
When hook-up wiring, make sure to use the SL-JPC exclusive pliers.
SL-CJ2
(Black)
For 0.3 mm2
(Conductor cross-section area)
Wire dia.:
ø1.1 to ø1.6 mm
ø0.043 to ø0.063 in
Note: PNP output device cannot be connected.
Title 2D CAD DATA 3D CAD DATA

SL-BMW

SL-BX

SL-BXJ

SL-CJ1

SL-TJ1

SU-7J



Title FİLE

Title FİLE

EDS file for SL-GU1-D


Title FİLE

SL-BM (Conditions in use for CE conformity)

SL-BMJ / SL-BXJ

SL-BMW / SL-BW

SL-BX

SL-CJ1/SL-CJ2

SL-TJ1