Picking Switch for Shutter SL-VPK02 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Picking Switch for Shutter SL-VPK02


Suitable for picking of important maintenance parts and safety-related parts for which erroneous picking must be prevented by all means!

Picking Switch for Shutter
SL-VPK02
*The shutter is not supplied with the product.
Picking Switch for Shutter SL-VPK02
CE Marking

CE Approved
CE : EMC Directive

NEW August 2016 - Dual-end shutter support fixture has been added.

Features

Note:
The product is equipped with an arm (shutter) that operates at high speed. Take note of the arm (shutter) moving range in order to prevent the arm (shutter) from hitting the worker's face or other parts of the body.

Equipped with shutter for zero picking error

The shutter closes to prevent erroneous picking. The unit features a cantilever supporter and is compact, so it is suitable for installation on a narrowwidth shelf for miniature parts.

Equipped with shutter for zero picking error

Four-stage setting for both opening angle and closing angle

The shutter operates properly even if the tray extends from the edge of parts shelf. The shutter closing delay time can also be adjusted in five stages.

Four-stage setting for both opening angle and closing angle

Lamp colors selectable

It can be selectable from green (default), red, blue, and a two-stage indication (green, blue)*.
* The address setting remote controller (optional) is required for changing the lamp color.

Remote controller

The SL-VAR1 address setting remote controller (optional) enables easy setting of addresses and selection of lamp color. The remote controller helps reduce the setting workload during shelf rearrangement. The remote controller can be used repeatedly for changing settings.

Remote controller

Supports a wide frontage

The SL-VPK02 supports up to 600 mm 23.622 in in shutter width by using the dual-end shutter support fixture MS-PK02-W. 
(However, the shutter weight should be 100 g or less.)

Title 2D CAD DATA 3D CAD DATA

SL-VPK02

Applications

Automobile assembly line
Automobile assembly line
Electronic device assembly line
Electronic device assembly line

Order guide

Type Appearance Model No.
Picking switch SL-VPK02
(Note)
SL-VPK02
Address setting remote controller SL-VAR1 SL-VAR1

Note : The shutter is not supplied with the product.

Option

Product name Appearance Model No. Description
Dual-end shutter
support fixture
MS-PK02-W MS-PK02-W For the picking switch SL-VPK02.
It can be used in the case that the shutter weight is 50 to 100 g and the shutter width is 300 mm 11.811 in or more.
【Recommended shutter】
Material: Corrugated plastic Density 800 g/m2
Max. thickness :5 mm
Max. weight :100 g
Recommended size:W600 mm x H210 mm

System configuration

Click on the product image to go to each product page.

*Windows and Windows 7 are registered trademarks or trademarks of Microsoft Corporation in the U.S. and other countries

Title 2D CAD DATA 3D CAD DATA

SL-VPK02



Title FİLE

Picking Switch / Picking Sensor


Title FİLE

Title FİLE

SL-VPK02

MS-PK02-W

SL-VAR1