Wide-area Ionizer ER-TF - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Wide-area Ionizer ER-TF


"Wide-area Ionizer" is the choice for your production site

Wide-area Ionizer ER-TF
CE Marking

CE Approved
CE : EMC Directive 

Features

Resolves dissatisfaction with existing ionizers

Ionizers up until now had not been able to fully meet the needs for on-site work.
With a style not seen before, the wide-area ionizer ER-TF pursues performance in cell production lines and resolves dissatisfaction with existing ionizers.

A new way of charge removal from Panasonic Industrial Devices SUNX

Indicators showing operation conditions

This section will now explain the indicator lights that indicate such abnormalities as maintenance time of the discharge needle unit and the decrease in the amount of ventilation due to filter clogging.

■ERROR indicator:
Lights up when an intrusion of a foreign object into the discharger is detected by the entry detection function, or when an abnormal discharge, air intake constraint caused by clogged filter, or any other abnormality of the fan is detected.

■CHECK indicator:
Lights up when it is time for maintenance of the discharge needle unit, or when a drop in the fan speed resulting from filter clogging is detected.

■FAN indicator:
Lights up when a fan error or a fan check is detected.

■BAR indicator:
Lights up when a discharger error or a discharger check is detected.

Airflow adjustable in 4 levels

Fan speed can be adjusted in 4 levels. By setting the fan speed to MAX, speedy static removal of wide area is possible.

Easy filter cleaning

The fan air intake filter can be easily taken out by sliding open the cover. This greatly reduces the manhour in cleaning.

Silent fan cover (option) is available.

Without decreasing the airflow, it is possible to reduce noise during fan suction.
You can easily attach the silent fan cover to the front of the main unit fan with a single step.

Title 2D CAD DATA 3D CAD DATA

ER-TF04-EX

ER-TF06-EX

ER-TF06-EX + ER-TF06MS1

ER-TF08-EX

Applications

400 mm 15.748 in type to suit operation space
400 mm 15.748 in type to suit operation space

Front setup

600 mm 23.622 in type to cover cell production desk
600 mm 23.622 in type to cover cell production desk

Overhead setup

800 mm 31.496 in type to accomodate wide workbench
800 mm 31.496 in type to accomodate wide workbench

Desktop setup

Order guide

Ionizer main unit

Type Appearance Charge removal time
(±1,000 V→±100 V)
Ion balance Model No.
Wide-area fan type 1 sec. approx. (Note 1) ±10 V or less (Note 2) ER-TF04-EX
ER-TF06-EX
ER-TF08-EX
Note 1 : Typical value at a distance of 200 mm 7.874 in from the front surface of the air outlet at the unit center at maximum fan speed.
Note 2 : Typical value at a distance of 300 mm 11.811 in from the front surface of the air outlet at the unit center at maximum fan speed.
Note 3 : Please prepare an AC cable separately as it is needed.
The following cables are available as optionals:
CN-ACCN-C2: AC cable (conforming to CCC), CN-ACKR-C2: AC cable (conforming to KTL)

Connector configuration
(IEC 60320 C7)

Title 2D CAD DATA 3D CAD DATA

ER-TF04-EX

ER-TF06-EX

ER-TF06-EX + ER-TF06MS1

ER-TF08-EX



Title FİLE

ER-TF

Static Control Devices Selection Guide


Title FİLE

Title FİLE

ER-TF□-EX