LED Collimated Beam Sensor LA-300 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

LED Collimated Beam Sensor LA-300


LED collimated beam type which is as accurate as a laser sensor, but much safer

LED Collimated Beam Sensor LA-300
CE Marking

CE Approved
CE : EMC Directive

Features

Safe red LED beam

Since a red LED, harmless to the eyes, has been incorporated as the beam source, you are free from strict laser safety regulations.
Moreover, due to the red LED beam source, the measuring spot is visible, which makes positioning of the object simple.

Safe red LED beam

Compact size

Its emitter and receiver are much smaller compared to those of the amplifier built-in type (LA-510). Hence, they can be installed even in a narrow space inside an automatic assembly machine, etc.

Slim type / LA-305

- Emitter:
W18 x H40 x D10 mm
W0.709 x H1.575 x D0.394 in
- Receiver:
W18 x H40 x D10 mm
W0.709 x H1.575 x D0.394 in

Span & shift adjustment

For the analog output, in addition to the span adjustment function, a convenient shift function which enables the analog voltage to be shifted by ±0.5 V has been incorporated.

Example:
To shift the analog voltage from 2.51 V to 3.00 V with a certain amount of beam interruption

Span & shift adjustment

Simple beam alignment

Beam alignment is easy by using the target label (accessory). Further, the 3-stage stability indicators on the amplifier indicate the incident beam level at a glance.

Title 2D CAD DATA 3D CAD DATA

LA-305

LA-305 (Receiver)

LA-305 (Emitter)

LA-A1(P)

Order guide

Sensor heads

Type Appearance Sensing range Sensing width Minimum sensing object Model No.(Note)
Slim 300mm 11.811 in 5mm 0.197 in ø0.05mm ø0.002 in opaque oblect LA-305
Note: The model No. with suffix "P" shown on the label affixed to the product is the emitter, "D" shown on the label is the receiver.
(e.g.) Emitter of LA-305: LA-305P, Receiver of LA-305: LA-305D

Amplifiers

Always use the sensor head and the amplifer together as a set.

Type Appearance Model No. Output
NPN output LA-A1 NPN open-collector transister
(Comparative outputs)
Analog voltage
・Output voltage : 1 to 5V
PNP output LA-A1P PNP open-collector transister
(Comparative outputs)
Analog voltage
・Output voltage : 1 to 5V

Accessories

MS-LA3-2

Sensor head mounting bracket for LA-305 (Note)

Two M3 (length 15 mm 0.591 in) screws with washers are attached.

Note: 2 sets are required to mount the emitter / receiver.

Discontinued products [Sensor head]

 

* Substitute products will not guarantee the specifications of discontinued products.
Please check the specification details from catalog before use.
Discontinued products Recommended substitute
Product number Part number Last time buy   Product number Series Remark
LA-310 LA-310 December 28, 2008
To be discontinued
- Ultra-compact Laser Collimated Beam Sensor HL-T1 The part number for suggested alternative products may be different under the conditions of use.
Title 2D CAD DATA 3D CAD DATA

LA-305

LA-305 (Receiver)

LA-305 (Emitter)

LA-A1(P)



Title FİLE

Title FİLE

Title FİLE

LA-305

LA-310

LA-A1 / LA-A1P