Ultra-compact Laser Collimated Beam Sensor HL-T1 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Ultra-compact Laser Collimated Beam Sensor HL-T1


Ultra-compact sensor head
A high-functionality intelligent controller

Ultra-compact Laser Collimated Beam Sensor HL-T1
CE Marking FDA

CE , FDA Approved
CE : EMC Directive
FDA :HL-T□F only

Features

Ultra-compact sensor head

The ultra-compact size and yet the high level of performance. These sensors save space.

HL-T1001A(F) HL-T1005A(F)
HL-T1010A(F)
HL-AC1(P)

Resolution of 4 μm 0.157 mil

A high resolution of 4 μm 0.157 mil (at an average 64 cycles) allows high-precision positioning and size judgment.

Resolution of 4 μm 0.157 mil

Long sensing range

Long sensing range of 500 mm 19.685 in [HL-T1005A(F), HL-T1010A(F)] and 2 m 6.562 ft [HL-T1001A(F)] are available.

High-precision judgment even from minute differences in light intensity

The sensors are sensitive to minute differences in light intensity, so that they can judge even the opacity of glass.
In addition, the amount of light received can be displayed as a percentage to allow you to determine permeation rates.

High-precision judgment even from minute differences in light intensity

Minimum sensing object diameter ø8 μm ø0.315 mil [HL-T1001A(F)]

The laser with a beam diameter of ø1 mm ø0.039 in can sense extremely small objects with dimensions in micrometers such as bonding wires.

Minimum sensing object diameter ø8 μm <span class=

Adoption of a Class 1 laser

The adoption of a Class 1 laser (IEC / JIS) eliminates the need for safety countermeasures, so that these sensors can be used in photoelectric sensor applications with confidence.

Fully equipped with convenient functionality

A wide range of convenient features has been incorporated into the unit's compact body: standard laser beam reception intensity setting / auto scaling setting / measurement processing (various timer and hold functions) / differentiation / monitor focus function.
These features make the unit useful for a wide variety of applications.

Detection resolution can be easily confirmed

The current resolution can be easily confirmed by setting the controller to indicate resolution display mode.
By displaying the resolution, the marginal increment can be easily determined for the threshold value setting, helping to accurately determine whether sensing can be performed.

Detection resolution can be easily confirmed

3 types of teaching functions are now available

3 types of teaching functions are available: positioning teaching / 2-point teaching / automatic teaching, thus enabling a variety of applications to be accommodated for many different types of production sites.

3 types of teaching functions are now available

Analog output is switchable between current / voltage

The analog output can be switched between either of two different outputs; current (4 to 20 mA) / voltage (±4 V). With the monitor focus function, the output can be adjusted over the range from -5 V to +5 V, or from 0 V to +5 V, facilitating connectivity with a variety of output devices.

Monitor focus function

The linear output is fully adjustable over the following range (current: 4 to 20 mA / voltage: ±4 V). The usage of the monitor focus function together with selectable current / voltage switching for the linear output allows for compatibility with a variety of output devices.

Monitor focus function
The linear output must be set by determining output values (maximum; current: 0 to 23.5 mA / voltage: ±5.5 V) at two different points, for the arbitrary display value.

FDA regulations conforming types are available

FDA regulations conforming types, most suitable for equipment used in the USA, are now available.

- FDA : Class II
- IEC / JIS : Class 1

Superior operability has been achieved

All settings can be easily performed by using the fourway keys and viewing the digital displays.

Superior operability has been achieved

Calculations for 2 sensors are possible

The calculation unit (optional) just needs to be connected between the two controllers to enable calculations (addition and subtraction) to be carried out for two sensors. No digital panel controller is needed either.

Calculations for 2 sensors are possible

Self-check for laser diode deterioration

The intelligent controller performs self-checking for laser diode deterioration. If the controller detects significant deterioration (end of diode life), an error will be displayed on the main digital display panel. This function enables users to prepare in advance for potential laser diode malfunctions.

Self-check for laser diode deterioration

Title 2D CAD DATA 3D CAD DATA

HL-AC1(P)

HL-T1001A (Receiver)

HL-T1001A (Emitter)

HL-T1001F (Receiver)

HL-T1001F (Emitter)

HL-T1001□ / HL-T1005□

HL-T1005A (Receiver)

HL-T1005A (Emitter)

HL-T1005F (Receiver)

HL-T1005F (Emitter)

HL-T1010A (Receiver)

HL-T1010A (Emitter)

HL-T1010F (Receiver)

HL-T1010F (Emitter)

HL-T1010□

Applications

Checking the positioning of chip components
Checking the positioning of chip components
Detecting defective lead frame seating
Detecting defective lead frame seating
Sensing wafer position in wafer cassette
Sensing wafer position in wafer cassette

Order guide

Sensor heads

Type Appearance Sensing range Sensing width Min. sensing object Conforming standards / regulations Model No.
Beam diameter ø1 mm ø0.039 in type 2m
6.562 ft
ø1 mm ø0.039 in
(ø1 to ø2.5mm ø0.039 to ø0.098 in at 500 to 2,000mm 19.685 to 78.740 in sensing range)
ø8 μm ø0.315 milopaque object
(ø50 μm ø1.969 milopaque object at 500 to 2,000 mm 19.685 to 78.740 in sensing range)
IEC / JIS HL-T1001A
FDA / IEC / JIS HL-T1001F
Sensing width 5 mm0.197 intype 500mm
19.685 in
5mm
0.197 in
ø0.05 mm ø0.002 inopaque object IEC / JIS HL-T1005A
FDA / IEC / JIS HL-T1005F
Sensing width 10 mm 0.394 in type 500mm
19.685 in
10mm
0.394 in
ø0.1 mm ø0.004 inopaque object IEC / JIS HL-T1010A
FDA / IEC / JIS HL-T1010F
Note : The model No. with "P" shown on the label affixed to the product is the emitter, "D" shown on the label is the receiver.

Accessories

MS-HLT1-1

[Sensor mounting bracket for HL-T1001A(F) / HL-T1005A(F) (Note)]

Two M3 (length 20 mm 0.787 in) screws with washers are attached.

Note: 2 sets are required to mount the emitter and receiver.

MS-LA3-1

Sensor mounting bracket for HL-T1010A(F) (Note)

Two M3 (length 25 mm 0.984 in) screws with washers are attached.

CN-HLT1-1

(Sensor head to controller connection cable)

Controllers

Type Appearance Model No. Output
NPN output HL-AC1 NPN open-collector transistor
(Judgment output)
Current / voltage output
(Linear output)
PNP output HL-AC1P PNP open-collector transistor
(Judgment output)
Current / voltage output
(Linear output)

Calculation unit

Appearance Model No.
HL-AC1-CL
Title 2D CAD DATA 3D CAD DATA

HL-AC1(P)

HL-T1001A (Receiver)

HL-T1001A (Emitter)

HL-T1001F (Receiver)

HL-T1001F (Emitter)

HL-T1001□ / HL-T1005□

HL-T1005A (Receiver)

HL-T1005A (Emitter)

HL-T1005F (Receiver)

HL-T1005F (Emitter)

HL-T1010A (Receiver)

HL-T1010A (Emitter)

HL-T1010F (Receiver)

HL-T1010F (Emitter)

HL-T1010□



Title FİLE

HL-T1


Title FİLE

Title FİLE

HL-T1 User's Manual

HL-T1 INSTRUCTION MANUAL