Compact Laser Displacement Sensor HL-G1 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Compact Laser Displacement Sensor HL-G1


High performance CMOS
Laser Displacement Sensors

Compact Laser Displacement Sensor HL-G1
CE Marking FDA

CE , FDA Approved
CE : EMC Directive

In December 2013, Diffuse reflection type and Specular reflection type have been added to the product line-up.

Click here

Features

Application Proposal

Compact Laser Displacement Sensor HL-G1 Application ProposalIntroducing application for the HL-G1 series which is a compact, self-contained laser displacement sensor.
Please utilize this information to have improvement and efficiency in your production.

>>View Application Proposal


 

Fast

Setup is fast and efficient by using the built-in digital display to set measurement parameters such as sampling cycle and output options.

■ Easy configuration using the digital display

The built-in digital display makes it easy to perform sensor setting while checking displacement values.

Easy configuration using the digital display

■ Easy to embed in machines and production lines thanks to a built-in controller

Controller installation and mounting space is not required because controller function is included in sensor unit.

Easy to embed in machines and production lines thanks to a built-in controller

Compact

The HL-G1 series features a compact design despite its built-in controller and digital readout. Thanks to our miniaturization technology, it can easily be installed on robot arms and in confined spaces.

■ Compact size despite the built-in controller and digital readout

Compact size despite the built-in controller and digital readout

■ Lightweight body that can be installed on movable parts
Its lightweight resin body weighs 70 g approx., which can be installed on moving parts such as sliders and robot arms. Cable with superior flexibility is fitted as standard.

■ IP67 protective enclosure protects from water and dust

Thanks to its IP67 protective enclosure, the HL-G1 can be used in the presence of water and dust. Mounting holes are lined with metal sleeves, allowing the instrument to be tightened securely in place with up to 0.8 N・m of torque.

IP67 dust- and water-proof protective enclosure

User-friendly

The HL-G1 series now features a user-friendly interface that offers improved ease of use when operating via computer software or HMI unit for more sophisticated operation and analysis.

■ Software tool for sensor configuration and evaluation

In addition to configuring up to 16 sensors at once, this free tool makes it easy to gather data needed for analysis, including received light waveform monitoring and data buffering. The interface language can be selected at the time of installation.

・Data buffering
Stores and displays measurement data.
Data can be superimposed on past measurement data and displayed for easy comparison and analysis.

・Received light waveform display
Displays the amount of light received across all cells of the detector element.

Software tool for sensor configuration and evaluation

・Measured value display
Displays measured values as well as the output state for all terminals.

Operating environment
PC environment PC/AT compatible
OS OS 32/64 Edition Service Pack
Windows® Vista 32bit Business SP2 or later
Windows® 7 32bit/64bit Professional -
Windows® 8 Pro
CPU Intel Pentium4 2 GHz or more, either equaling or surpassing
Graphics XGA (1024 x 768 256 colors) or more
Memory 2 GB or more
Hard disk Free space 100 MB or more
USB interface USB 2.0 full speed (USB 1.1 compatible)

 

* This software accommdates below language. You can select the language when installing.
・Japanese ・English ・Korean ・Chinese

■ HMI screen data for sensor setting and data indication

The GT02 / GT12 series HMI can be used in combination with the HL-G1 to allow easy confirmation of sensor status and configuration of sensor settings from a remote location. Japanese, English, Chinese, and Korean are supported. For more information about the GT series, refer to GT series pages.open new window

HMI screen for the HL-G1 series

Select from the following HMI operator panels:
Power supply: 24 V
Communications port: RS422 (RS485)
・AIG02GQ14D
・AIG02MQ15D
・AIG12GQ14D / AIG12GQ15D
・AIG12MQ14D / AIG12MQ15D

■ Software Download
Software tool and HMI screen data are available for download.
*Membership registration is required to access/download this data.

>>Go to Data download.

I/O to accommodate multiple needs

・Timing input and multi input
Inaddition to timing input select the desired input according to your application:
・Zero set on/off ・Reset ・Laser control ・Teaching ・Memory switching ・Saving

・Featuring 3 outputs and an analog 2 outputs
With three outputs, the HL-G1 can be used to generate HI/GO/LOW judgment output or alarm output. The analog output can be used in both current and voltage modes.

Fewer model numbers to register

・Support for both NPN and PNP polarity
A single model number accommodates both NPN and PNP wiring polarity, reducing the number of model numbers that must be registered for maintenance purposes.

Smooth setup changes

・Memory switching function
Up to four groups of sensor settings can be stored for fast recall. Easy switching among setting groups allows smooth setup changes.

Global Support

Thanks to high-precision measurement at a resolution of 0.5 μm 0.02 mil and an LED digital display that provides exceptional ease of use, the HL-G1 series will see use in a variety of applications on production lines worldwide.

Global Support
Title 2D CAD DATA 3D CAD DATA

HL-G103A-RA-C5

HL-G103A-RS-J

HL-G105A-RA-C5

HL-G105A-RS-J

HL-G108A-RA-C5

HL-G108A-RS-J

HL-G1□-A-C5

HL-G1□-S-J

Applications

HL-G103□

Controlling the height of a dispenser nozzle
Controlling the height of a dispenser nozzle

NEW
HL-G103A□

Measuring HDD surface fluctuation
Measuring HDD surface fluctuation

HL-G105□

Inspecting processed food quantities
Inspecting processed food quantities

NEW
HL-G105A□

Positioning of wafer
Positioning of wafer

HL-G108□

Detecting presence of O-ring
Detecting presence of O-ring

NEW
HL-G108A□

Measuring the eccentricity of a metal shaft
Measuring the eccentricity of a metal shaft

HL-G112□

Detecting rotating direction of fan
Detecting rotating direction of fan

NEW
HL-G125□

Testing sheet slack
Testing sheet slack

Order guide

Sensor Heads

Diffuse reflection type

Type Appearance Measurement center
distance and
measuring range
Resolution Beam diameter Model No.
Standard type 30 ±4 mm
1.181 ±0.157 in
0.5 μm
0.020 mil
0.1 × 0.1 mm
0.004 × 0.004 in
HL-G103-A-C5
High function type HL-G103-S-J
Standard type 50 ±10 mm
1.969 ±0.394 in
1.5 μm
0.059 mil
0.5 × 1.0 mm
0.020 × 0.039 in
HL-G105-A-C5
High function type HL-G105-S-J
Standard type 85 ±20 mm
3.346 ±0.787 in
2.5 μm
0.098 mil
0.75 × 1.25 mm
0.030 × 0.049 in
HL-G108-A-C5
High function type HL-G108-S-J
Standard type 120 ±60 mm
4.724 ±2.362 in
8 μm
0.315 mil
1.0 × 1.5 mm
0.039 × 0.059 in
HL-G112-A-C5
High function type HL-G112-S-J
Standard type 250 ±150 mm
9.843 ±5.906 in
20 μm
0.787 mil
1.75 × 3.5 mm
0.069×0.138 in
NEW
HL-G125-A-C5
High function type NEW
HL-G125-S-J

Specular reflection type

Type Appearance Measurement center
distance and
measuring range
Resolution Beam diameter Model No.
Standard type 26.3 ±2 mm
1.035 ±0.079 in
0.5 μm
0.020 mil
0.1 × 0.1 mm
0.004 × 0.004 in
NEW
HL-G103A-RA-C5
High function type NEW
HL-G103A-RS-J
Standard type 47.3 ±5 mm
1.862 ±0.197 in
1.5 μm
0.059 mil
NEW
HL-G105A-RA-C5
High function type NEW
HL-G105A-RS-J
Standard type 82.9 ±10 mm
3.264 ±0.394 in
2.5 μm
0.098 mil
0.2 × 0.2 mm
0.008 × 0.008 in
NEW
HL-G108A-RA-C5
High function type NEW
HL-G108A-RS-J

Return to top

Extension cable (For high function type)

Type Appearance Appearance Model No. Description
Extension cable
(for High functionality type)
HL-G1CCJ2 Length: 2 m 6.562 ft, Weight: 130 g approx. 14-core cabtyre cable with connector on both ends
HL-G1CCJ5 Length: 5 m 16.404 ft, Weight: 320 g approx.
HL-G1CCJ10 Length: 10 m 32.808 ft, Weight: 630 g approx.
HL-G1CCJ20 Length: 20 m 65.617 ft, Weight: 1300 g approx.

INFORMATION OF INTERFACE CONVERTER

The communications interface converter of HL-G1 series is RS-422 or RS-485. We will recommend the following interface converter when connecting to PC by USB.

LINEEYE CO., LTD.
Interface converter (USB to RS-422/485) SI-35USB
Website:http://www.lineeye.com open new window

Title 2D CAD DATA 3D CAD DATA

HL-G103A-RA-C5

HL-G103A-RS-J

HL-G105A-RA-C5

HL-G105A-RS-J

HL-G108A-RA-C5

HL-G108A-RS-J

HL-G1□-A-C5

HL-G1□-S-J



Title FİLE

HL-G1

HL-G125□ / HL-G10□A□


Title FİLE

HL-G1 operation screen data (for programmable display GT02)

HL-G1 operation screen data (for programmable display GT02) (Windows7 64bit Edition)

HL-G1 operation screen data (for programmable display GT12)

HL-G1 operation screen data (for programmable display GT12) (Windows7 64bit Edition)

Setting and monitoring software tool HL-G1SMI


Title FİLE

HL-G1 USER'S MANUAL

HL-G1(Console-dedicated Version) USER'S MANUAL

HL-G1□-A-C5 / HL-G1□-S-J(Bundle)

HL-G1□A-RA-C5 / HL-G1□A-RS-J(Bundle)