Leak Detection Sensor EX-F70/EX-F60 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Leak Detection Sensor EX-F70/EX-F60


High-speed detection even a little liquid leak

Leak Detection Sensor EX-F70/EX-F60
UL Recognaized CE Marking Korean S Mark

UL , CE , Korean S Mark Approved
CE : EMC Directive
UL : Recognition
Korea's S-mark certification : Excluding NPN output type

Features

Reliable detection [EX-F70]

- Capillarity effect

The unique effect of capillarity enables reliable detection of small leaks and viscous liquids.

Reliable detection

- New type of detection method

When a leak occurs, the beam from the beam-emitting part scatters through the leaked liquid and is not transmitted to the beam-receiving part.

Compact, space-saving [EX-F70]

This slim (10 mm 0.394 in) side-mounting sensor is especially good for use in confined spaces.

Compact, space-saving [EX-F70]

Compact, space-saving

No need for sensitivity adjustment [EX-F70]

No need for sensitivity adjustment with adjuster, so initial mounting is easy.

Easy operation check [EX-F70]

This sensor is equipped with a NORMAL indicator (green) which lights up when mounting correctly, and a FAULT indicator (red) which lights up when sensing the leaked liquid or when mounted incorrectly (forgetting to mount exclusive mounting bracket). So, the operation can be checked easily.

Safe design [EX-F70]

If the sensor is not mounted correctly, if the cable is broken or disconnected, or if the sensor is not operating correctly, the output is the same as when the beam is not received (LEAK).
Design deals with human errors such as, forgetting to mount, etc.

Easy installation & reset [EX-F70]

Facilitates easy installation: the SUS mounting bracket type can be installed using only a single screw and the PVC mounting bracket type can be installed using only two screws or an adhesive. No component replacement required for resetting after leak detection. The simple shape makes it easy to wipe off the leaked liquid.

PVC mounting bracket available [EX-F72□]

A mounting bracket made of PVC (polyvinyl chloride) is available. This mounting bracket can be used normally in environments that normal metal brackets would corrode.

PFA enclosure gives excellent chemical resistance [EX-F60]

The sensor enclosure and the cable sheath are made from PFA which is highly resistant to chemicals. Accurate sensing is achieved even if there are leaks of chemicals such as sulfuric acid, hydrochloric acid or ammonia.

PFA enclosure gives excellent chemical resistance

Easy installation & reset [EX-F60]

The simplified shape makes it easy to clean up after liquid leaks, simply by wiping off the liquid, and no parts need to be replaced.

Compact, space-saving [EX-F60]

Even with its built-in amplifier, the size is compact at W26 x H19 x D9 mmW1.024 x H0.748 x D0.354 in, so that it can be used even in narrow spaces.

Compact, space-saving [EX-F60]

Wire-saving unit made especially for connecting leak detection sensors! [EX-FC1]

- Saves wiring! Now connects up to 8 leak detection sensors
EX-FC1 is a simple wire-saving unit for exclusive use with EX-F71/72, EX-F61/F62 leak detection sensors. (It can be used with general sensors as well.)
EX-FC1 integrates the outputs from up to 8 leak detection sensors into a single OR output, so significant wiring and space savings are achieved.
* Even with only one leak detection sensor connected, an OFF signal is output if the sensor detects liquid leakage, or if the unit has been installed incorrectly.

- Slim & compact
Space savings are significant, as the ultra-thin & compact EX-FC1 has main unit body dimensions of only W20 x H80 x D52 mm W0.787 x H3.150 x D2.047 in.

- Connects easily with one-touch connector Connections are made by simply inserting the leak detection sensor cable leads into the snap male connector SL-CP1, then push until the connector snap-locks! This saves the time and the trouble of stripping the insulation from each lead before attaching to terminals.

Connects easily with one-touch connector

Title 2D CAD DATA 3D CAD DATA

EX-F61(-PN)/EX-F62(-PN)

EX-F62

EX-F71

EX-F71 + MS-EX-F7-1

EX-F72

EX-F72 + MS-EX-F7-3

EX-FC1

MS-EX-F6-1 [PFA mounting bracket]

Order guide

Leak detection sensors

Type Appearance Sensing object Cable length Model No. Output
General purpose SUS mounting
bracket type
Water, Fluorinert™
(Note 1, 2)
2 m6.562 ft EX-F71 NPN open-collector transistor
EX-F71-PN PNP open-collector transistor
PVC mounting
bracket type
EX-F72 NPN open-collector transistor
EX-F72-PN PNP open-collector transistor
Chemical-resistant PFA mounting
bracket type
Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc.
(Note 1, 3)
3 m9.843 ft EX-F61 NPN open-collector transistor
EX-F61-PN PNP open-collector transistor
PVC mounting
bracket type
EX-F62 NPN open-collector transistor
EX-F62-PN PNP open-collector transistor
Note 1: Highly viscous liquid may not be detected stably.
Note 2: Fluorinert™ is the world wide trademark of 3M.
Note 3: The agents mentioned above are examples.
For details, please contact our office.

5 m 16.404 ft cable length type

5 m 16.404 ft cable length type (standard: 2 m 6.562 ft or 3 m 9.843 ft) is also available.
When ordering this type, suffix "-C5" to the model No.
(e.g.) 5 m 16.404 ft cable length type of EX-F71-PN is "EX-F71-PN-C5".

Simple wire-saving unit for leak detection sensor

Appearance Model No. Output
EX-FC1 Relay contact 1 a

Accessories

MS-EX-F7-1
(SUS mounting)

 

MS-EX-F7-2
(PVC mounting bracket for adhesive fixing)

 

MS-EX-F7-3
(PVC mounting bracket for two-point fixing)

 

MS-EX-F6-1
(PFA mounting bracket)

 

MS-EX-F6-2
(PVC mounting bracket)

 

SL-CP1
(Snap male connector)
[10 pcs. per set]

 

SC-PK
(Connector end caps)
[8 pcs. per set]

 

MS-SL-2
(Unit mounting base)

 
Title 2D CAD DATA 3D CAD DATA

EX-F61(-PN)/EX-F62(-PN)

EX-F62

EX-F71

EX-F71 + MS-EX-F7-1

EX-F72

EX-F72 + MS-EX-F7-3

EX-FC1

MS-EX-F6-1 [PFA mounting bracket]



Title FİLE

Title FİLE

Title FİLE