Safety Control Unit SF-C21 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Safety Control Unit SF-C21


Creating safety circuits is easier than ever!

CE Marking TUV SUD cTUVus Certificate

UL , CE , CSA , TUV Approved
CE : Machinery Directive, EMC Directive
UL, CSA : Certified by TÜV SÜD America Inc. (NRTL)

JIS

NEW November 2015 - Convenient features have been added!新しいウィンドウで開く

Features

Easy 1
Finding space to install and wire is easy

One SF-C21 can do the work of four safety relay units.
Simple to wire the units in the control panel!!

One SF-C21 can do the work of four safety relay units. Simple to wire the units in the control panel!!

Small, so the unit can be installed in a narrow space
Compact with a height 97 mm 3.819 in × width 45 mm 1.772 in.
It's easy to find installation space for the SF-C21 unit.

Small, so the unit can be installed in a narrow space

Easy to monitor status with a generalpurpose PLC
Four auxiliary outputs (PNP semiconductor output) are provided.
Using RS-485 communications (MODBUS RTU), various general-purpose control units (PLC, HMI, etc.) can monitor the SF-C21 information such as the status, the selected logic, and any error status.

Easy to monitor status with a generalpurpose PLC

Long-life semiconductor output (PNP) adopted for control output and auxiliary output

Easy 2
Absolutely no programming skills required.
Operation is easy - just select a preset logic

Simply turn a switch to set
Eight preset logics, safety-certified and compatible up to control category 4 PLe, can be selected by simply turning the rotary switch.

Simply turn a switch to set

8 preset logics
*The logic customized by user can be stored in the logic No. 0.

Refer to " 8 preset logics"

Easy to set the "OFF delay"
The OFF delay time can be easily set by simply turning the rotary switch to any one of patterns.

Pattern No. 0 1 2 3 4 5 6 7 8 9
OFF delay time (sec.) 0 0.1 0.5 1 2 5 10 15 30 60

* The OFF delay time applies to control output 2. In case of setting the OFF delay time to control output 1, the "Configurator SF-C" software is needed.

Password protection prevents inadvertent logic changes

 

Easy 3
Application-based customization is easy

Easy to create a reliable safety circuit
Use our "Configurator SF-C" software to build your own safety circuits of connected devices, control logic, output modes, etc. No programming skills required!

Customized logics are safety-certified too!!
All possible logic combinations created with the "Configurator SF-C" software are already safety-certified by the certification bodies. The software also has a "simulation mode" to test if the prepared logic and safety circuit operates as intended. If the logic is not complete, the software will block its transfer to the SF-C21 unit.

Note:
Please read the instruction manual in advance when selecting or creating logics, and verify whether the combination of connecting devices and logics complies with each machine safety standard.

Configurator SF-C

8 preset logics compatible up to control category 4, PLe standards

Note:
Please make sure that the combination of logics and input devices complies with each machine safety standard.

Logic No.1:Overall stop control

Overall stop control

When any connected input becomes OFF, the entire control output will be OFF.

*1 The delay time can be set using the Configurator SF-C.
*2 The initial OFF delay is set to 0 seconds.

Logic No.2:Parallel muting control

Parallel muting control

When the muting input becomes ON, the light curtain will be temporarily disabled.

*1 The delay time can be set using the Configurator SF-C.
*2 The initial OFF delay is set to 0 seconds.

Logic No.3:Sequential muting control

Sequential muting control

Only when the muting input becomes ON following a predefined sequence, the light curtain will be temporarily disabled.

*1 The delay time can be set using the Configurator SF-C.
*2 The initial OFF delay is set to 0 seconds.

Logic No.4:Partial stop control 1

Partial stop control 1

When the emergency stop input is OFF, the entire control output will be OFF. When any other input is OFF, its corresponding control output will be OFF.

*1 The delay time can be set using the Configurator SF-C.
*2 The initial OFF delay is set to 0 seconds.

Logic No.5:Partial stop control 2

Partial stop control 2

When the emergency stop input or the input from the back-end process becomes OFF, the entire control output will be OFF. When the input from the front-end process becomes OFF, only its corresponding control output will be OFF.

*1 The delay time can be set using the Configurator SF-C.
*2 The initial OFF delay is set to 0 seconds.

Logic No.6:Two-hand control

Two-hand control

This control is applied when a two-hand operation switch is used for control.Only when both switches of the two-hand operation switch are operated within 0.5 sec., control output will be ON.

*1 The delay time can be set using the Configurator SF-C.
*2 The initial OFF delay is set to 0 seconds.

Logic No.7:OR control

OR control

Even when the guard (input A) is OFF, if the enabling switch is ON the control output will be ON. If either the emergency switch or input B becomes OFF, the entire control output will be OFF regardless of the status of the input A and emergency switch.

*1 The delay time can be set using the Configurator SF-C.
*2 The initial OFF delay is set to 0 seconds.

Logic No.8:Operation mode selection control

Only when mode selection using the key selector is followed by the enabling switch being turned ON, the control output will be ON regardless of the open / close status of the guard.
Note that if the emergency stop switch is OFF, the entire control output will be OFF.

*1 The delay time can be set using the Configurator SF-C.
*2 The initial OFF delay is set to 0 seconds.

Title 2D CAD DATA 3D CAD DATA

Order guide

Product
name
Appearance Model No. Number of input points Number of output points
Safety
input
Reset /
EDM input
Control
output
Auxiliary
output
Safety
control
unit
SF-C21 2×4 2 2×2 4
Title 2D CAD DATA 3D CAD DATA


Title FİLE

SF-C21

SF-C21 Overview of additional features


Title FİLE

Title FİLE

SF-C21 Instruction Manual

SF-C21 QUICK INSTRUCTION MANUAL