Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Compact / Connector built-in type] PM-65 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Compact / Connector built-in type] PM-65


Easy connection with a single touch using commercially-available connectors

PM-65
UL C-UL Recognaized CE Marking Korean S Mark

UL/C-UL , CE , Korean S Mark Approved
UL : Recognition
CE : EMC Directive
Korea's S-mark certification : NPN output type only

Features

 

 

The only 1*
Three protection circuits standard on all models

All models are standardly equipped with the following protection circuits in their compact bodies. These protection circuits minimize the possibility of sensor malfunctions caused by erroneous wiring.
1.Reverse supply polarity protection circuit
2.Reverse output polarity protection circuit
3.Output short-circuit protection circuit

The only 1*
Ample beam emitting / receiving distance of 6 mm 0.236 in

The beam emitting and receiving sections are 0.5 mm 0.02 in thinner than those on our conventional models while their external dimensions are the same. As a result, the distance between the beam emitting point and receiving point increased by 1 mm 0.039 in. The wider distance means less possibility of collision between the sensing section and sensing object.

Ample beam emitting / receiving distance of 6 mm 0.236 in
(Unit: mm in)
Note : The above image is PM-K45.

The only 1*
Beam marks for easy adjustment

The upper-limit and lower-limit positions of beam can be visually confirmed from the front and back sides of the sensor unit.
This allows easy adjustment of the position of sensing object.

Beam marks for easy adjustment
Note : The above image is PM-K45.

No. 1*
Large and easy to see
Multi-angle operation indicator

The large operation indicator (orange) lights up when the beam enters. The indicator is easy to see from above and from the sides.

* As of November 2015, according to our company’s survey.

All models easy to mount with M3 screws

The sensor unit can be installed with one or two M3 screws.。
(M3 screws and washers are not included.)
■Models requiring one M3 screw for installation : PM-F65, PM-R65
■Models requiring two M3 screws for installation : Models other than above

Resistant to vibrations and impacts

The sections where stress concentrates, such as the connecting section of the cable and internal circuit, are covered with a resin. This helps prevent malfunctions caused by vibrations and impacts.

Resistant to vibrations and impacts

Can be connected using commercially-available connectors

The connector connection type eliminates the extra work of soldering and insulation processing. In addition, the connector used is a commercially-available multipurpose connector which is also currently used by the DP-100 series of digital pressure sensors.

Can be connected using commercially available connectors

Improved maintenance and workability significantly reduces total cost

The processing cost of the connector cables can be drastically reduced through the use of commercially-available crimping connectors.

Previous model (Soldering: Connector type)

Previous model (Soldering: Connector type)

  • Automation is hard because of soldering.
  • Insulation processing is required.
  • A large space is necessary at the terminal area.
  • Connectors are not reliable
    (not fully connected or seated).

 

Previous model (Converted to the cable-type commercially-available connector)

Previous model (Converted to the cable-type commercially-available connector)

  • Crimping processing is required in two places.
  • A set of commercially-available connectors is necessary.
  • There are many processes for cable connections.
  • An intermediate box is required.

 

PM-65 series (Commercially-available connectors can be used)

PM-65 series (Commercially-available connectors can be used)

  • Crimping processing makes automation possible so the connectors are also highly reliable.
  • Soldering, insulation processing, and an intermediate box are not necessary.
  • Connectors are widely available.
  • Mounting in a small space is easy.
  • Strongly connected using a locking connector.
  • 1 m 3.281 ft, 2 m 6.562 ft, 3 m 9.843 ft, and 5 m16.404 ft connector cables are available.
  • Bending-resistant cables are available.

 

Title 2D CAD DATA 3D CAD DATA

PM-F65(-P)

PM-F65W(-P)

PM-K65(-P)

PM-L65(-P)

Applications

Positioning of a pallet
Positioning of a pallet

Pallet is stopped by sensing the dog*.

Sensing the starting point and overrun of a moving body
Sensing the starting point and overrun of a moving body

Starting point and overrun is sensed using the dog* on the base.

* "Dog" refers to the sensing object for activating the sensor's detecting operation.

Sensing the starting point on a rotating body
Sensing the starting point on a rotating body

The starting point can be sensed by making a slit in the rotating body.

Order guide

Compact / Connector built-in type

Type Appearance
(mm in)
Sensing range Model No. Output Output operation
K type 6 mm
0.236 in
(fixed)
PM-K65 NPN open-collector
transistor
Incorporated with 2 outputs:
Light-ON / Dark-ON
PM-K65-P PNP open-collector
transistor
T type PM-T65 NPN open-collector
transistor
PM-T65-P PNP open-collector
transistor
PM-T65W NPN open-collector
transistor
PM-T65W-P PNP open-collector
transistor
L type PM-L65 NPN open-collector
transistor
PM-L65-P PNP open-collector
transistor
Y type PM-Y65 NPN open-collector
transistor
PM-Y65-P PNP open-collector
transistor
F type PM-F65 NPN open-collector
transistor
PM-F65-P PNP open-collector
transistor
PM-F65W NPN open-collector
transistor
PM-F65W-P PNP open-collector
transistor
R type PM-R65 NPN open-collector
transistor
PM-R65-P PNP open-collector
transistor
PM-R65W NPN open-collector
transistor
PM-R65W-P PNP open-collector
transistor
Note : PM-T65W is mounting-compatible with our conventional model "PM-T64W".
PM-F65W(-P) is mounting-compatible with our conventional model "PM-F54(P)".
PM-R65W(-P) is mounting-compatible with our conventional model "PM-R54(P)".
Title 2D CAD DATA 3D CAD DATA

PM-F65(-P)

PM-F65W(-P)

PM-K65(-P)

PM-L65(-P)



Title FİLE

PM-25/45/65


Title FİLE

Title FİLE

PM-□25/□45/□65 INSTRUCTION MANUAL