Long Range & Wide Area Photoelectric Sensor PX-2 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Long Range & Wide Area Photoelectric Sensor PX-2


Compact size sensor realizes wide sensing area & long sensing range

Long Range & Wide Area Photoelectric Sensor PX-2
CE Marking

CE Approved
CE : EMC Directive

Features

Ideal sensing area with very little dead zone

The advanced optical system of the PX-2 series reduces the dead zones in front of an automatic guided vehicle (AGV).
The dead zones at the sides are further minimized if auxiliary sensors which can be easily mounted with connectors are used.
(For PX-24, PX-24ES, PX-23ES and PX-26)

Ideal sensing area with very little dead zone

Sensing areas selectable as per route condition

Sensing areas can be selected with switches to suit the route conditions of an AGV.
Further, in case of PX-24ES and PX-23ES, the sensing areas can also be selected with external signals.

Sensing areas selectable as per route condition

Compact size for space-saving

Its size is half of a conventional model, and the attached cable orientation is freely adjustable. Hence, it can also fit in a small AGV.
Moreover, sensitivity adjustment can be done on the front face.

Long sensing range 5 m 16.404 ft type

PX-26 has a long sensing range of 5 m 16.404 ft. Even on a high-speed AGV, it can detect an object quite early so that slowing down and stopping are smooth.

Sleep function

The sensor can be put into the sleep (stand-by) condition when it is not used and can be restored to operating condition by an external signal.
Consequently battery is conserved as the power consumption is reduced to 1/5.

Automatic interference prevention function

One PX-2 sensor can simultaneously receive beams from 25 Nos. of other PX-2 sensors without resulting in any interference. Even if AGVs are facing each other, the PX-2 sensor on one AGV reliably detects the other AGVs.
Hence, it can be safely used even at a place where several AGVs are moving.

External sensitivity adjustment

The sensitivity of the sensor can be adjusted, within the range set by the manual adjuster, by an external input.
(For PX-24, PX-24ES, PX-23ES and PX-26)

Title 2D CAD DATA 3D CAD DATA

PX-21/22

PX-23/24/24ES/26

PX-2□

PX-SB1

Order guide

Main Sensors

Type Appearance Sensing range Model No.
Standard type 3 m 9.843 ft PX-22
  Short sensing range 1 m 3.281 ft PX-21
Auxiliary sensor connectable type 3 m 9.843 ft PX-24
  With external control function PX-24ES
  Short sensing range 1 m 3.281 ft PX-23ES
Long sensing range 5 m 16.404 ft PX-26

Auxiliary sensor

Type Appearance Sensing range Model No.
Auxiliary sensor 700 mm 27.559 in PX-SB1

Accessories

MS-PX-2 (Main sensor mounting bracket)

Two bracket set [Four M4 (length 8 mm 0.315 in) screws with washers are attached.]

MS-NX5-1 (Auxiliary sensor mounting bracket)

Two M4 (length 25 mm 0.984 in) screws with washers and two M4 nuts are attached.
Title 2D CAD DATA 3D CAD DATA

PX-21/22

PX-23/24/24ES/26

PX-2□

PX-SB1



Title FİLE

PX-2


Title FİLE

Title FİLE

PX-2

PX-SB1