Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH


Simple and compact design

Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH
CE Marking

CE Approved
CE : EMC Directive(In combination with sensor heads SH-3□)

Features

■Notice of change for conforming to the revised CE Mark related directive
>> Click here

Simple automatic sensitivity setting

Anyone can carry out the optimum sensitivity setting by simply pressing two buttons.

Simple automatic sensitivity setting

Quick wire connection

A snap of the lever secures the connection of the sensor head cables on the SU-7 amplifier. It is no longer required to strip the wire insulation. Further, the exclusive stripper (accessory) can be used to easily peel off the sensor cable outer sheath.

Quick wire connection
Caution:
The outer fluorine sheath of the chemical resistant type sensor head, SH-61R, cannot be cut off with the exclusive stripper.

Thickness: 10 mm 0.394 in

Installation space can be greatly reduced as the SU-7 amplifier is just 10 mm 0.394 in thick.
(W10 x H31.5 x D67 mm W0.394 x H1.240 x D2.638 in)

Chemical resistant type [SH-61R]

・Strong against chemicals
Since the sensor heads and the attached cables are covered by fluorine resin, SH-61R can be used in a harsh chemical environment.
Moreover, it has a long sensing range of 2.5 m 8.202 ft.

Chemical resistant type [SH-61R]

Nine advanced functions for versatile sensing

1.Limit sensitivity setting [All models]
Sensitivity for detection of minute differences can be set by the push of one button without the presence of an object. 

2.Sensitivity shift [All models]
The set threshold level can be shifted from the center towards either ON or OFF level. 

3.Remote sensitivity selection [SU-79]
The amplifier stores four channels of sensitivity levels.
They can be selected by the remote inputs. 

4.Remote sensitivity setting [SU-77]
The sensitivity level can be adjusted from a remote place. 

5.External synchronization [SU-75]
The timing for sensing can be specified by an external input. 

6.Test input (emission halt) [SU-75]
Convenient for start-up inspection. 

7.Sensitivity margin indication [All models]
The number of blinks of the stability indicator indicates the degree of the sensitivity margin. 

8.ON-delay / OFF-delay timer [SU-7] [SU-77] [SU-79] [SU-7J]
The timer can be selected for either ON-delay or OFF-delay of 0 to 5 sec. 

9.Interference prevention [All models]
Two sensor heads can be mounted close together.

Line-focus type [SH-84R]

・Suitable for detecting printed characters
It can be used to detect printed characters because of its line shaped projected area of 1 x 4 mm 0.039 x 0.157 in.

・Strong against position deviation
Since it makes a judgment based upon the total light incident on the sensing area, it is not easily affected by a deviation in sensing object position.

Line-focus type [SH-84R]

Glass substrate detection type [SH-72]

・Reliable glass substrate detection
Its unique optical system enables detection of transparent glass plate, as well as, specular film deposited glass plate at the same distance.

- No dead zone
- Repeatability: 0.03 mm 0.001 in
- Not affected by background

Glass substrate detection type [SH-72]

Pinpoint type with green LED beam [SH-82G]

・Red / white color discrimination
Discrimination between red / white, red / yellow or red / orange, which is difficult with the red LED type, is easy with SH-82G.

Pinpoint type with green LED beam [SH-82G]

Pinpoint type with red LED beam [SH-82R]

・Suitable for tiny object sensing
・Spot diameter: ø0.7 mm ø0.028 in
Top / bottom face of a chip component can be easily discriminated.

Pinpoint type with red LED beam [SH-82R]

Ultra-slim type [SH-2□]

・Compact size: 0.3 cm3
・Thickness: 3 mm 0.118 in

Ultra-slim type [SH-2□]

・Versatile mounting
Diffuse reflective type sensor head
- Front sensing

Ultra-slim type [SH-2□]

Thru-beam type sensor head
- Front sensing
- Side sensing

Ultra-slim type [SH-2□]

Ultra-small type [SH-3□]

・Sensor head with indicator
An operation indicator, which enables easy checking of the operation at site, has been incorporated.

・2 m 6.562 ft long sensing range with red LED beam (SH-33R) 
Visible red LED beam makes alignment easy.

Ultra-small type [SH-3□]

Title 2D CAD DATA 3D CAD DATA

SH-21

SH-21E

SH-22

SH-31R

SH-31G/31R/33R

SH-32R

SH-61R

SH-72

SH-82R

Applications

Positioning of a lead frame
Determining position of lead frame
Identifying top face from bottom face of chip components
Identifying top face from bottom face of chip components
Detecting red mark on white paper
Detecting red mark on white paper
Detecting transparent glass substrates in cassette
Detecting transparent glass substrates in cassette
Detecting IC height
Detecting IC height
Detecting wafer cassette in quartz tank containing cleaning liquid
Detecting wafer cassette in quartz tank containing cleaning liquid

Order guide

Sensor heads

Type Appearance Sensing range Model No.
(Note)
Emitting element Operation indicator
Ultra-
slim
type
Thru-
beam
Front sensing 300mm
11.811 in
SH-21 Infrared LED -
Side sensing SH-21E
Diffuse reflective Front sensing 50mm
1.969 in
SH-22
Ultra-
small
type
Thru-beam 1m
3.281 ft
SH-31R Red LED Incorporated
100mm
3.937 in
SH-31G Green LED
2m
6.562 ft
SH-33R Red LED
Diffuse reflective 100m
3.937 in
SH-32R
Chemical resistant type Thru-beam 2.5m
8.202 ft
SH-61R Red LED
Convergent
reflective
(Using optional mounting bracket MS-SH6-2)
5 to 80 mm
0.197 to 3.150 in
(Convergent point: 25mm0.984 in)
Mark
sensor
Pinpoint 10 to 14 mm0.394 to 0.551 in
(Convergent point: 12mm0.472 in)
(Spot diameter:ø0.7mmø0.028 in)
SH-82R Red LED
110 to 14 mm0.394 to 0.551 in
(Convergent point: 12mm0.472 in)
(Spot diameter: ø1mm ø0.039 in)
SH-82G Green LED
Line-focus 17 to 23 mm0.669 to 0.906 in
(Convergent point: 20mm0.787 in)
(Spot size: 1 x 4mm 0.039 x 0.157 in)
SH-84R Red LED
Glass substrate
detection sensor
0.5 to 7.5 mm
0.020 to 0.295 in
(with transparent glass substrate)
SH-72 Infrared LED -
Note : The model No. with "P" shown on the label affixed to the thru-beam type sensor is the emitter, "D" shown on the label is the receiver.

Amplifiers

Type Appearance Model No.
Standard type NPN output type SU-7
  Plug-in connector type SU-7J
PNP output type SU-7P
External synchronization input type SU-75
Remote sensitivity adjustment type SU-77
Remote sensitivity selection type SU-79
Model No. Functions (○ : Incorporated)
Automatic sensitivity setting Sensitivity shift Limit sensitivity setting Remote sensitivity setting Remote sensitivity selection Sensitivity margin indication External synchroni-
zation
Test input (emission halt) Timer Inter-
ference prevention
SU-7 - - - -
SU-7J
SU-7P
SU-75 - -  
SU-77 - - -
SU-79 - - -

Plug-in connector type

It is usable with the sensor & wire-saving link system S-LINK, sensor block for simple wiring SL-BMW or SL-BW, or with connector attached cable CN-54-C2 or CN-54-C5.

SU-7J

Sensor & wire-saving link system S-LINK

SU-7J

Sensor block for simple wiring SL-BMW, SL-BW

SU-7J

Connector attached cable
CN-54-C2 (2 m 6.562 ft long)
CN-54-C5 (5 m 16.404 ft long)

Accessories

MS-DIN-2
Amplifier mounting bracket

 

SU-CT1
Exclusive stripper

 

MS-SH6-1
Sensor head mounting bracket for SH-61R

 
Title 2D CAD DATA 3D CAD DATA

SH-21

SH-21E

SH-22

SH-31R

SH-31G/31R/33R

SH-32R

SH-61R

SH-72

SH-82R



Title FİLE

SU-7/SH


Title FİLE

Title FİLE

SH-2 / SH-3

SH-61R

SH-72

SH-8

SU-7

CN-54-C□ [Connector attached cable]

SU-CT1