Amplifier-separated Type Digital Laser Sensor LS-500 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Amplifier-separated Type Digital Laser Sensor LS-500


Industry’s smallest* laser sensor head
LASER CLASS 1

Thru-beam
M6 Cylindrical type
Sensor head
LS-H101
LS-H101
Thru-beam
Square type
Sensor head
LS-H102
LS-H102
Coaxial reflective
type
Sensor head
LS-H201
LS-H201
Coaxial
retroreflective
type
Sensor head
LS-H901
LS-H901
Amplifier
LS-500
LS-500
CE Marking FDA

CE , FDA Approved
CE : EMC Directive

*Smallest amplifier-separated type laser sensor head as of September 2014 based on research conducted by our company

Features

Featuring stainless steel (SUS) enclosure that won’t break when bumped during installation or maintenance.
[Thru-beam M6 Cylindrical type LS-H101]

M6, one-point installation
Features an easy-to-install design.

M6, one-point installation

1 m 3.281 ft sensing range
(Amplifier response time is set to STD mode)

1 m 3.281 ft sensing range
[Thru-beam Square type LS-H102]

1 m 3.281 ft sensing range
(Amplifier response time is set to STD mode)
Delivers sufficient sensing range for use with 450 mm 17.717 in wafers.

1 m 3.281 ft sensing range

Simple positioning
Check the optimal light receiving position at a glance while watching the red spot on the beam axis adjustment screen.

Simple positioning

Two-point installation
The thru-beam type LS-H102 features the same form as the EX-L200 amplifier built-in ultra-compact laser sensor.
And it can be used as an EX-L200 with a digital indicator.

Featuring a 60% smaller design (by volume) than previous coaxial reflective models
[Coaxial reflective type LS-H201]

Our smallest unit is smaller in every dimension at just W8 × H23 × D18 mm W0.315 × H0.906 × D0.709 in (excluding indicators).

Our smallest unit is smaller in every dimension at just W8 × H23 × D18 mm W0.315 × H0.906 × D0.709 in (excluding indicators).

Coaxial design
By using a laser which goes straight in a coaxial design, the LS-H201 is able to detect stably in confined spaces and simple installation can be achieved.

Coaxial design

Easy-to-see operation indicator
The LS-H201’s operation indicator is visible from all directions.

Easy-to-see operation indicator

Small, long-range spot
The LS-H201 produces a spot of ø2 mm ø0.079 in at a sensing range of up to 300 mm 11.811 in (amplifier response time is set to STD mode).

The light source is positioned in the center of the sensor head, which helps to design easier.
[Coaxial retroreflective type LS-H901]

Industry's smallest* and thinnest design
Size just as thin as W8 × H23 (excluding indicators) × D18 mm W0.315 × H0.906 × D0.709 in.

The LS-H901 is even thinner than previous models, measuring just W8 × H23 (excluding indicators) × D18 mm W0.315 × H0.906 × D0.709 in.

Sensing range of 10 mm to 1 m 0.394 in to 3.281 ft
(Amplifier response time is set to STD mode)
Good to perform detection at close range.

Among industry's fastest response times* 60 μs [Amplifier LS-500]

Amplifier LS-500

Enhanced compatibility with fiber sensors in shape and operability.
It is easier to select and add laser sensors which have a lot of convenient features in common with fiber sensors.

 

Increased compatibility with fiber sensors

The LS-500 series features the same operation, menu displays, and shape.

Detection of beam axis misalignment
Dual outputs (self-diagnosis output)

Light intensity deterioration due to dust accumulation can be notified as an alarm output. Output 2 can be set to self diagnosis output. When the teaching of output 1's threshold value is carried out, output 2 is set concurrently with the setting randomly shifted by the amount of surplus of threshold value.

Stable sensing over the long term

Equipped with the threshold value tracking function.
This contributes to maintain stable detection over the long term as well as to reduce maintenance man-hours.
In order to track the light amount change due to environmental factors (such as dust accumulation), the incident light intensity can be checked in a certain cycle and threshold value is reset automatically.

Logic operations

Three logic operations (AND, OR, XOR) can be performed with laser sensor only. A dedicated controller is not required and the wire saving and cost reduction are both achieved. Compatible with the FX-500 series.

Data bank

Eight sets of amplifier settings can be stored in the unit's built-in memory. The ability to save and load settings reduces workload when changing the setup in a multi-model production environment.

* Smallest amplifier-separated type laser sensor head as of September 2014 based on research conducted by our company

Title 2D CAD DATA 3D CAD DATA

LS-501, LS-501P

LS-H101□

LS-H102□

LS-H201□, LS-H901□

Applications

Thru-beam M6 Cylindrical type LS-H101

Wafer presence detection
Wafer presence detection
Lead frame position detection
Lead frame position detection
Workpiece orientation detection
Workpiece orientation detection

Thru-beam Square type LS-H102

Wafer inclination detection
Wafer inclination detection
IC float detection
IC float detection
Detection of residual matter inside molds
Detection of residual matter inside molds

Coaxial reflective type LS-H201

Detecting a presence of a workpiece through a workbench
Detecting a presence of a workpiece through a workbench
Detecting a gasket in a cap
Detecting a gasket in a cap
Detection of threaded holes and thread
Detection of threaded holes and thread

Coaxial retroreflective type LS-H901

Detecting a presence of a tape
Detecting a presence of a tape
Detecting the upper limit of DVDs, substrate, etc.
Detecting the upper limit of DVDs, substrate, etc.
Detecting a presence of a bottle
Detecting a presence of a bottle

Order guide

Sensor heads

Type Appearance Model No.
Thru-beam type Cylindrical LS-H101
Square LS-H102
Coaxial reflective type LS-H201
Coaxial retroreflective type LS-H901

5 m 16.404 ft cable length type

5 m 16.404 ft cable length types (Standard: 2 m 6.562 ft) are available. When ordering this type, add "-C5" at the end of the model number.

Package without reflector

The LS-H901 is also available without a reflector (RF-330). When ordering this type, add "-Y" at the end of the model number.

 

Type Standard type
Model No.
5 m 16.404 ft cable length type Package without reflector
Model No. Model No.
Thru-beam type Cylindrical LS-H101 LS-H101-C5 -
Square LS-H102 LS-H102-C5 -
Coaxial reflective type LS-H201 LS-H201-C5 -
Coaxial retroreflective type LS-H901 LS-H901-C5 LS-H901-Y

Amplifiers

Type Appearance Model No. Output Connection method
Connector type LS-501 NPN open-collector
transistor two outputs
Use quick-connection cable (optional)
LS-501P PNP open-collector
transistor two outputs
Cable type
(With external input)
LS-501-C2 NPN open-collector
transistor two outputs
2 m 6.562 ft cabtyre cable (6-core) included
Cable outer diameter:ø4 mmø0.157 in
LS-501P-C2 PNP open-collector
transistor two outputs

Quick-connection cables

Quick-connection cable is not supplied with the connector type amplifier. Please order it separately.

Type Appearance Model No. Description
Main cable
(4-core)
CN-74-C1 Length: 1 m3.281 ft 0.2 mm2 4-core cabtyre cable, with connector on one end
Cable outer diameter:ø3.3 mm ø0.130 in
CN-74-C2 Length: 2 m6.562 ft
CN-74-C5 Length: 5 m16.404 ft
Sub cable
(2-core)
CN-72-C1 Length: 1 m3.281 ft 0.2 mm2 2-core cabtyre cable, with connector on one end
Cable outer diameter:ø3.3 mm ø0.130 in
Connectable to a main cable up to 15 cables.
CN-72-C2 Length: 2 m6.562 ft
CN-72-C5 Length: 5 m16.404 ft

Connector

Type Appearance Model No. Description
Connector for amplifier CN-EP4 Connector included with sensor head
Use for maintenance, for example when another connector is damaged.
Five pcs. per set

End plates

End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.

Appearance Model No. Description
MS-DIN-E When amplifiers are mounted in cascade, or when an amplifier moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together.
[Two pcs. per set]

Accessories

MS-LS-1 (Sensor head mounting bracket): LS-H201□/LS-H901□

MS-LS-1
Material: Stainless steel SUS304
Two M2 (length 12 mm 0.472 in) screws with washers
[stainless steel (SUS)] are attached.

RF-330 (Reflector)

RF-330

MS-EXL2-2 (Mounting plate for thru-beam type)

MS-EXL2-2
Material: Stainless steel (SUS304)
Title 2D CAD DATA 3D CAD DATA

LS-501, LS-501P

LS-H101□

LS-H102□

LS-H201□, LS-H901□



Title FİLE

Title FİLE

Title FİLE