Amplifier Built-in Ultra-compact Laser Sensor EX-L200 - İstanbul Otomasyon Sistemleri
  • Information
  • Applications
  • Order Guide
  • CAD DATA
  • Video
  • Catalogs
  • Software
  • Manuals

Amplifier Built-in Ultra-compact Laser Sensor EX-L200


Introducing ultra-compact amplifier built-in laser sensor

Amplifier Built-in Ultra-compact Laser Sensor  EX-L200
CE Marking FDA

CE , FDA Approved
CE : EMC Directive

Features

Spot type EX-L261□ , Line spot type EX-L262□

Ultra-compact

Due to the customized IC and optical design, high precision detection is fulfilled with directivity and visibility achievable only by laser. The laser adopted is Class 1 (IEC / JIS / FDA) laser that is safe to use, so that there is no need to separate the areas of sensor usage.

Ultra-compact

High precision

■Min. sensing object ø0.3 mm ø0.012 in (typical) [EX-L211]

The ø0.5 mm ø0.020 in light receiving slit cuts out any unnecessary beam. As only the beam which enters into the slit becomes valid, an accurate and precise detection is possible. This is effective for minute object detection or small difference in level detection. Also, the aspheric surface adopts a glass module lens to deliver a high quality spot beam.

■Min. sensing object ø0.3 mm ø0.012 in

■Suitable for positioning and minute object detection [EX-L221]

A repeatability of 0.02 mm 0.0008 in or less at a range of from 100 mm to 200 mm3.937 to 7.874 in makes this type best suitable for positioning applications. Moreover, it boasts a top-class detection precision in the compact laser sensor category with its min. sensing object being ø0.01 mm ø0.0004 in.
The same aspheric surface glass lens used in the thru-beam type is adopted to minimize aberration and deliver a high quality beam spot.

Suitable for positioning and minute object detection

Easy beam-axis alignment [EX-L211/EX-L212]

・Visual positioning is easy due to silhouetting a sensing object against a receiver.

Visually confirm the optimal receiver position, adjusting the beam axis by aligning the objects while watching the red spot on the beam alignment screen. The diagram on the right shows an example with the lead of a mechanical pencil being detected through visual adjustment.

Easy beam-axis alignment [EX-L211/EX-L212]

Easy setting

EX-L200 series has the same mounting pitch as ultra-compact photoelectric sensor EX-20 series so that the time taken in designing is saved.

Easy setting

Strong against water and dust with protection structure IP67

The sensor can be used even in environment where water or dust present because of its protection structure IP67.

Strong against water and dust with protection structure IP67

High usability

■M3 screw used for secure tightening

The mounting holes have metal sleeves inserted to prevent damage to the sensor due to over tightening of the screws. It is possible to tighten securely with M3 screws.
(Tightening torque: 0.5 N.m)

M3 screw used for secure tightening

■Conductor thickness 1.5 times increased to make wiring easier

The lead wire conductor’s thickness is increased to 0.15 mm2from 0.1 mm2 of the conventional ultra-compact photoelectric sensor. This makes it easier to perform crimpling work on the cables for better workability. In addition, the tensile strength of the crimpling area has become stronger.

Conductor thickness 1.5 times increased to make wiring easier

■Sensitivity adjuster [EX-L211/EX-L221/EX-L261/EX-L262]

A sensitivity adjuster of world smallest size is incorporated to offer strong performance in minute detection or high precision detection.

Sensitivity adjuster [EX-L211]

■Switchable output operation
The output operation switching input enables the switching of Light-ON or Dark-ON in one unit. This prevents ordering mistake and reduces the maintenance of spare parts.

Switchable output operation

■Low current consumption
The laser light source contributes to low current consumption, as it is approx.
5mA lower than a LED light source.

Title 2D CAD DATA 3D CAD DATA

EX-L21□-J / EX-L21□-P-J

EX-L21□ / EX-L21□-P / EX-L21□-C5 / EX-L21□-P-C5

EX-L221-J / EX-L221-P-J

EX-L221 / EX-L221-C5 / EX-L221-P / EX-L221-P-C5

EX-L26□-J/EX-L26□-P-J

EX-L26□/EX-L26□-P/EX-L26□-C5/EX-L26□-P-C5

EX-L291(-P)(-C5)(-Y)

EX-L291(-P)-J(-Y)

Applications

Detecting ICs that are out of position in multiple palettes
Detecting ICs that are out of position in multiple palettes
Confirming arrival of substrate
Confirming arrival of substrate
Detecting objects from an opening
Detecting objects from an opening
Detecting tip of very thin pipe
Detecting tip of very thin pipe
Checking protrusion of wafer
Checking protrusion of wafer
Determining electric parts position
Determining electric parts position
Detecting processed holes
Detecting processed holes
Detecting chip components
Detecting chip components
Sensing unevenly-colored workpieces
Sensing thin workpiece such as PCB
Sensing glossy or curved-surface workpiece

Order guide

Convergent reflective

Type Appearance Sensing range Model No. Emission spot size
(Typical)
Sensitivity
adjuster
NPN output PNP output
Spot 20 to 50 mm
0.787 to 1.969 in
(Convergent point:
22 mm 0.866 in) (Note 1)
EX-L261 EX-L261-P ø1 mm
ø0.039 in or less
(at a sensing distance of 50 mm 1.969 in)
Incorporated
Line spot 20 to 70 mm
0.787 to 2.756 in
(Convergent point:22 mm 0.866 in)
(Note 1)
EX-L262 EX-L262-P Approx. 5 x 1 mm
0.197 x 0.039 in
(at a sensing distance of 50 mm 1.969 in)
Incorporated

Thru-beam

Type Appearance Sensing range Model No. Emission spot size
(Typical)
Sensitivity
adjuster
NPN output PNP output
Minute object
detection type
1m 
3.281 ft
EX-L211 EX-L211-P Approx. 6 x 4 mm 
0.236 x 0.157 in
(at a sensing distance of 1 m3.281 ft)
Incorporated
Long sensing
range type
3m
9.843ft
EX-L212 EX-L212-P Approx. 8 x 5.5 mm
0.315 x 0.217 in
(at a sensing distance of 1 m3.281 ft)
-

Retroreflective

Type Appearance Sensing range Model No. Emission spot size
(Typical)
Sensitivity
adjuster
NPN output PNP output
Long sensing
range type
4m
13.123ft
(Note 3)
EX-L291 EX-L291-P Approx. 6 x 4 mm
0.236 x 0.157 in
(at a sensing distance of 1 m3.281 ft)
Incorporated

Spot reflective

Type Appearance Sensing range Model No. Emission spot size
(Typical)
Sensitivity
adjuster
NPN output PNP output
Minute object
detection type
45 to 300 mm
1.772 to11.811 in
EX-L221 EX-L221-P ø1 mm ø0.039 in or less
(at a sensing distance of 300 mm 11.811 in)
Incorporated
Note 1: The model No. with "E" shown on the label affixed to the thru-beam type sensor is the emitter, "D" shown on the label is the receiver.
Note 2: The sensing range is the value for RF-330 reflector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in "A" of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.
Note 3: Refer to OPTIONS for the polarizing filter PF-EXL2-1 and the refl ector RF-210.
Note 4: When positioning the reflector nearby, the angular characteristic become more narrow. Adjust the angle of a sensor or reflector.
Note 5: The sensing range is specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object.

M8 pigtailed type and 5 m 16.404 ft cable length type

M8 pigtailed type and 5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) are also available.
When ordering these types, suffix "-J" for the M8 pigtailed type, "-C5" for the 5 m 16.404 ft cable length type to the model No.
Please order the mating cable the M8 pigtailed type separately.

(e.g.)
M8 pigtailed type of EX-L211-P is "EX-L211-P-J"
5 m 16.404 ft cable length type of EX-L211-P is "EX-L211-P-C5"

M8 pigtailed type

Standard type M8 pigtailed type
EX-L261 EX-L261-J
EX-L261-P EX-L261-P-J
EX-L262 EX-L262-J
EX-L262-P EX-L262-P-J
EX-L211 EX-L211-J
EX-L211-P EX-L211-P-J
EX-L212 EX-L212-J
EX-L212-P EX-L212-P-J
EX-L291 EX-L291-J
EX-L291-P EX-L291-P-J
EX-L221 EX-L221-J
EX-L221-P EX-L221-P-J

5 m 16.404 ft cable length type

Standard type 5 m 16.404 ft cable length type
EX-L261 EX-L261-C5
EX-L261-P EX-L261-P-C5
EX-L262 EX-L262-C5
EX-L262-P EX-L262-P-C5
EX-L211 EX-L211-C5
EX-L211-P EX-L211-P-C5
EX-L212 EX-L212-C5
EX-L212-P EX-L212-P-C5
EX-L291 EX-L291-C5
EX-L291-P EX-L291-P-C5
EX-L221 EX-L221-C5
EX-L221-P EX-L221-P-C5

Mating cable

CN-24A-C2 CN-24AL-C2
CN-24A-C5 CN-24AL-C5

 
 

・Mating cable (2 cables are required for the thru-beam type.)

Type Model No. Cable length
Straight CN-24A-C2 2 m 6.562 ft
CN-24A-C5 5 m 16.404 ft
Elbow CN-24AL-C2 2 m 6.562 ft
CN-24AL-C5 5 m 16.404 ft

Package without reflector

Retroreflective type is also available without the reflector.

Type Model No.
NPN output PNP output
Retroreflective type EX-L291-Y EX-L291-P-Y
  M8 pigtailed type EX-L291-J-Y EX-L291-P-J-Y
5 m 16.404 ft cable length type EX-L291-C5-Y EX-L291-P-C5-Y

Accessory

MS-EXL2-2 (Mounting plate for thru-beam type): 1 pc.
MS-EXL2-3 (Mounting plate for retroreflective / spot reflective type): 1 pc.
RF-330 (Reflector): 1 pc.

Title 2D CAD DATA 3D CAD DATA

EX-L21□-J / EX-L21□-P-J

EX-L21□ / EX-L21□-P / EX-L21□-C5 / EX-L21□-P-C5

EX-L221-J / EX-L221-P-J

EX-L221 / EX-L221-C5 / EX-L221-P / EX-L221-P-C5

EX-L26□-J/EX-L26□-P-J

EX-L26□/EX-L26□-P/EX-L26□-C5/EX-L26□-P-C5

EX-L291(-P)(-C5)(-Y)

EX-L291(-P)-J(-Y)



Title FİLE

EX-L200

EX SERIES

LS-400


Title FİLE

Title FİLE

EX-L200

MS-EXL2-6